37 CFR 1.121: Replacement Drawing Sheets After an Office Action
37 CFR 1.121(d) explained: how to amend patent drawings with Replacement, New and Annotated Sheets, what you must explain in the response, and why a correction can never add new matter.
37 CFR 1.121 is the USPTO rule on how to amend an application. Its paragraph (d) is the one drawings fall under: when an office action objects to a figure and you change it, 1.121(d) decides what you file and how it is labeled. The official text is on eCFR, and examiners apply it with MPEP 608.02 and MPEP 714. This guide covers the drawing paragraphs only. For the notice that asks for corrected papers in the first place, see Notice to File Corrected Application Papers; for what the drawing itself must look like, see 37 CFR 1.84, paragraph by paragraph.
The three sheet labels in 1.121(d)
| Label | When you use it | What it must contain |
|---|---|---|
| Replacement Sheet | Any change to a figure already filed | Every figure that was on the prior version of the sheet, even if only one figure changed |
| New Sheet | A sheet that carries an additional figure | The added figure |
| Annotated Sheet | A marked-up copy of an amended figure, showing what changed | The annotated figure, placed with the explanation of the drawing change |
The wording of the rule, in short:
- Compliance. Every changed drawing must comply with 1.84. A replacement sheet is a chance to fix the formal problems in the same pass, because an examiner will check the new sheet against 1.84 again.
- Attachment. The replacement sheets are an attachment to the amendment document.
- Label. "Replacement Sheet" goes in the top margin. A sheet with an added figure is labeled "New Sheet" in the top margin.
- Whole sheet. A replacement sheet contains all the figures that were on the previous version of the sheet. Changing FIG. 2 on a sheet that also holds FIG. 1 and FIG. 3 means resubmitting all three.
- Explanation. All changes to the drawings are explained in detail, either in the drawing amendment or in the remarks.
Annotated Sheets: optional, unless the examiner asks
Paragraph (d)(1) lets you add a marked-up copy of any amended figure, with annotations showing the change. It must be labeled "Annotated Sheet" and sit in the section that explains the drawing change. Paragraph (d)(2) turns the option into a duty: when the examiner requires a marked-up copy, you must provide it.
Even when it is optional, an Annotated Sheet is often worth including. It shows the examiner at a glance that the change is formal, such as a moved numeral, a corrected margin or a replaced shaded area, and not a new feature.
What goes in the response
A drawing response usually has these parts, each starting on its own page (1.121(h)):
- Replacement Sheets of drawings, labeled and complete.
- Remarks or an "Amendments to the Drawings" section that lists each changed sheet and figure and says what was changed, for example: "FIG. 2 has been amended to move reference numeral 14 inside the margin and to replace gray shading with line shading. No new matter is added."
- If needed, Annotated Sheets next to that explanation.
If a figure changes, check the description too. Paragraph (e) says the disclosure must be amended when the Office requires it, to correct inaccuracies of description and definition and to secure substantial correspondence between the claims, the remainder of the specification and the drawings. A renumbered part in the figure usually means a matching edit in the text, and the other way round (see reference numerals for the rule that numerals match the description).
No new matter: the limit on every correction
Paragraph (f) is one sentence: no amendment may introduce new matter into the disclosure of an application. For drawings this draws a clear line.
- Formal changes are fine. Moving a figure inside the margins, redrawing a grey line in solid black, replacing a bracketed numeral with a plain one, fixing a FIG. label or sheet number, and replacing a photograph with the same thing as a line drawing.
- Showing something new is not. Adding a part, a connection or a step that the application as filed did not show or describe.
When an examiner objects that a feature recited in the claims is not shown in the drawings (37 CFR 1.83(a)), the answer depends on what the original application disclosed, and that is a legal judgment for you and your attorney. A replacement sheet cannot cure it by inventing structure. Your options usually are showing a feature the original text and drawings already support, or amending the claim. Our provisional drawings guide explains why what the first filing shows matters later.
A short checklist before you file
- Every sheet you changed is labeled Replacement Sheet in the top margin; any sheet that adds a figure is labeled New Sheet.
- Each replacement sheet contains all the figures that were on the sheet it replaces.
- Figure numbers and reference numerals are unchanged unless the change is the point of the amendment.
- Lines are solid black, text is at least 0.32 cm high, and everything sits inside the margins (1.84(g), (l), (p)).
- The response explains each change in detail, and says nothing was added that the application did not already disclose.
- Replacement drawings, remarks and any other section each start on a separate sheet.
- The deadline in the office action is noted and checked with your attorney or agent.
Doing it with PatentStroke
The Patent Drawing Objection Fix is built around these paragraphs. You upload the drawings you filed and paste the examiner's objection. It lists each objection with its rule, says whether it can be fixed by layout, by an AI redraw or only by you, and then produces the Replacement Sheet PDF: margins set, sheet numbers renumbered, the "Replacement Sheet" label in the top margin, every figure of the sheet included. It also writes the "Amendments to the Drawings" text from the changes it actually made. A claimed feature that is not shown, or numerals missing from the description, are marked "needs you", because those depend on what the original application disclosed.
The diagnosis costs 10 credits, and each replacement sheet 40 credits including 5 redraws, with a ceiling of 300 credits for one response. For drawings you have not filed yet, the figure checker tests a sheet against the main 1.84 paragraphs before you file, so the objection never arrives.
Frequently asked questions
What does 37 CFR 1.121(d) require for amended drawings?
Any change to an application drawing must comply with 37 CFR 1.84 and be submitted on a replacement sheet that is an attachment to the amendment document and is labeled "Replacement Sheet" in the top margin. The replacement sheet must include every figure that was on the previous version of the sheet, even if only one figure changed. A sheet with an added figure is labeled "New Sheet". All changes must be explained in detail in the drawing amendment or the remarks.
Do I need to send the whole drawing set again?
No. You replace only the sheets that change. But each replacement sheet carries all the figures that were on the sheet it replaces, not just the changed one. Sheets without a change stay as filed.
What is an Annotated Sheet?
A marked-up copy of an amended drawing figure with annotations showing the changes. Under 1.121(d)(1) you may include one; under 1.121(d)(2) you must provide one when the examiner requires it. It is labeled "Annotated Sheet" and goes in the part of the response that explains the drawing change.
Can I add a missing feature to the drawings in a replacement sheet?
Only if the original application already disclosed it. 37 CFR 1.121(f) says no amendment may introduce new matter into the disclosure. If an examiner objects that a claimed feature is not shown (37 CFR 1.83(a)), whether and how to show it is a decision for you and your patent attorney or agent.
Where does the Replacement Sheet label go?
In the top margin of the sheet, as 1.121(d) says. Keep it inside the margin area so it does not touch the figures, which stay inside the 1.84(g) sight area.
Does each part of the amendment start on its own page?
Yes. 37 CFR 1.121(h) requires each section of an amendment document, such as the claims, the specification, the replacement drawings and the remarks, to begin on a separate sheet.