Back to blog

PCT Drawing Requirements: Rule 11 Sheet Rules Compared With the USPTO

Nov 19, 2026PatentStroke Team

PCT drawing requirements under Rule 11 of the Regulations: A4 sheets, margins, line quality, numerals, figure numbering and words in drawings, with the differences from USPTO and EPO practice.

A PCT application is filed once and then follows national or regional paths, so its drawings have one rulebook to meet first: Rule 11 of the PCT Regulations. Rules 11.5 to 11.7 set the sheet, margins and numbering, Rule 11.11 limits words in drawings, and Rule 11.13 sets how the drawings themselves are executed. The full text is on WIPO's site. If your first filing is a US application, start with 37 CFR 1.84 and our USPTO checklist; this guide is for the international side and for comparing the two.

PCT sheet rules at a glance

ItemPCT ruleWhat it says
Sheet size11.5A4 (29.7 cm × 21 cm). Other sizes only if the record copy sent to the International Bureau is A4
Usable surface11.6(c)No larger than 26.2 cm × 17.0 cm, no frame around it
Minimum margins11.6(c)Top 2.5 cm, left 2.5 cm, right 1.5 cm, bottom 1 cm
Sheet numbers11.7Consecutive Arabic numerals, centered at the top or bottom of the sheet, not in the margin
Line quality11.13(a)Durable, black, sufficiently dense and dark, uniformly thick and well-defined, without colorings
Cross-sections11.13(b)Oblique hatching that does not impede the reading of reference signs and leading lines
Reduction test11.13(c)All details still distinct at a linear reduction to two-thirds
Scale11.13(d)If given at all, shown graphically
Numerals and letters11.13(e), (h)Simple and clear, no brackets, circles or inverted commas, at least 0.32 cm high
Figure numbers11.13(k)Arabic numerals, consecutive, independent of the sheet numbers
Reference signs11.13(l), (m)A sign absent from the description must not appear in the drawings, and vice versa; the same feature keeps the same sign throughout the application
Words in drawings11.11Only indispensable single words, or a few short catchwords in flow sheets and block diagrams
After filing11.14The same rules apply to replacement sheets

What is the same as the USPTO

If your drawings already satisfy 1.84, most of Rule 11 is met without extra work.

  • Margins and usable area. The drawing margins, 2.5 / 2.5 / 1.5 / 1.0 cm, and the 26.2 × 17.0 cm usable area are the same figures 1.84(g) gives for A4.
  • Numeral height. 0.32 cm in both.
  • Reduction. Both rules ask that the drawing stay readable when reduced to two-thirds.
  • Matching numerals. Both require every reference sign in the drawings to appear in the description and the other way round, and one feature to keep one sign. See reference numerals.
  • Flowcharts and block diagrams. Both let these be filed as drawings, with a few short words inside the boxes. See patent flowcharts.

Where to look twice

PointPCT (Rule 11)USPTO (37 CFR 1.84)
PaperA4 only for the record copyA4 or US Letter, one size per application
Sheet numberCentered at the top or bottom, not in the marginSheet number and total, such as 1/3, at the top center
Sideways figuresTop of the figure at the left of the sheetSheet turned so the top margin is on the right
WordsIndispensable single words, short catchwords in flow sheetsLegends with as few words as possible (1.84(o))

The sideways rule is the one that most often causes trouble: a wide figure placed correctly for a USPTO filing sits rotated the wrong way for a PCT filing. Check it when you reuse a US sheet set for an international filing.

Colors, photographs and shading

Rule 11.13(a) describes line drawings in black with no colorings. That is the baseline for the PCT. National and regional offices differ on color and photographs, and some change their practice over time. For instance, the EPO moved its drawing format rules from Rule 46 EPC, deleted from 1 February 2023, into a decision of its President (OJ EPO 2025, A49), and published a separate notice on drawings in color and greyscale (OJ EPO 2025, A57). Read the current text of the Office you are entering before you decide to file anything other than black line art.

Practical workflow for an international filing

  1. Build the set to the stricter reading. Black line art, solid lines, A4, margins of 2.5 / 2.5 / 1.5 / 1.0 cm, numerals of at least 0.32 cm, plain numerals with no brackets or circles.
  2. Number once. Figure numbers run through the whole application, sheet numbers are centered at the top or bottom outside the margin, and the numerals match the description.
  3. Keep the words out. Put names of parts in the description, and use numerals in the drawing. Where a flowchart needs text, keep it to short catchwords and leave room around the words so a translation fits.
  4. Check each sheet against the national phase early. The Office that handles the national or regional phase applies its own formal rules. Ask your attorney or agent which ones matter for the countries you plan to enter.

Using PatentStroke for PCT sheets

PatentStroke exports numbered filing sheets for the USPTO, EPO and PCT, and one file per figure for CNIPA, JPO and KIPO. Choose PCT when you export a set, and the sheets are laid out on A4 inside the Rule 11.6(c) margins, with numbered figures and at least 0.32 cm text. The figure checker tests an existing sheet for margins, line quality, numeral height and file format before you file. Whether the figures show everything the claims need, and what the national phase will accept, remain decisions for you and your attorney.

Frequently asked questions

What size must PCT drawing sheets be?

A4, 29.7 cm × 21 cm (PCT Rule 11.5). A receiving Office may accept other sizes, but the record copy sent to the International Bureau, and the search copy if the International Searching Authority wants one, must be A4.

What are the margins for PCT drawings?

On sheets containing drawings the usable surface may not exceed 26.2 cm × 17.0 cm, there must be no frame around it, and the minimum margins are 2.5 cm at the top, 2.5 cm on the left, 1.5 cm on the right and 1 cm at the bottom (Rule 11.6(c)).

How tall must numerals and letters be in PCT drawings?

Not less than 0.32 cm (Rule 11.13(h)). Numbers, letters and reference lines must be simple and clear, with no brackets, circles or inverted commas around them (Rule 11.13(e)).

Can PCT drawings be in color or use photographs?

Rule 11.13(a) asks for durable, black, sufficiently dense and dark, uniformly thick and well-defined lines and strokes without colorings. Anything beyond line drawings, such as photographs, needs a check of the current rules and of the receiving Office and Authority involved.

How do I turn the sheet for a wide figure in a PCT application?

Rule 11.13(j) says figures not in an upright position are presented sideways with the top of the figure at the left side of the sheet. The USPTO rule turns the sheet the other way: the top of the sheet, with its top margin, is on the right (37 CFR 1.84(i)).

Can I put words in PCT drawings?

Only single words that are absolutely indispensable, such as "water", "steam", "open", "closed" or "section on AB". In block schematic and flow sheet diagrams a few short catchwords indispensable for understanding are allowed. Words must be placed so a translation can be pasted over without touching any line (Rule 11.11).

Do the PCT rules also apply to replacement sheets?

Yes. Rule 11.14 applies Rules 10 and 11.1 to 11.13 to any document submitted after filing, including replacement sheets.